Unit Range Eco Range Modular Range Unit Range Eco Range
All Alsim products are designed to meet the needs and expectations of our clients and are manufactured with care by a dedicated team of craftsmen using high quality materials and advanced production techniques.
Maintenance can take the form of planned preventative actions or reactive work associated with the repair or replacement of items damaged or worn out in use.

Planned Preventative Maintenance
As with all assets, correct usage in line with the manufacturer’s instructions and a program of regular maintenance will ensure that the product continues to function correctly, meets your ongoing requirements and maximises your return on investment.
As noted in the following entries, all finishes and components should be regularly checked and any damage should be suitably repaired. Failure to identify and properly repair damage to any area of the item may cause danger and will impact on the long term performance of the product and the ultimate useful life.
The following items are for guidance purposes only and the frequency of inspections and associate maintenance programs and service works should be adjusted in cases of unusual or heavy use and where the location or operating environment presents excessive challenges to the product.
Plumbing Installation
The installation should be tested and inspected on an annual basis and whenever the product is relocated.

The water supply pipe should be thoroughly flushed with clean water prior to connection to the product in order to avoid the possibility of dirt or grit entering the pipework and impacting on the performance of the system.

This installation has been designed to work with a mains water supply with a minimum pressure of 1.5 bar and a maximum pressure of 4 bar. The product may not operate correctly if supplied at a pressure outside of this range.

The product must be properly levelled prior to use.

This plumbing installation on every product is tested and inspected at time of manufacture.

Water Heater
Alsim has fitted resettable Santon A7 storage water heaters since mid 2006 in the majority of products. These water heaters can be reset in the event of a fault but older models will require a replacement part. Please view the relevant information in the troubleshooting section for further information on bringing the device back into operation.

All water heaters must be fully charged with water prior to electrical connection in order to avoid damage to the heating element.

Frost Protection
All plumbing installations should be suitably protected from the effects of the weather with anti-frost heating. It is important that this heating is operational during all periods of cold weather in order to avoid potential damage to the product.

Answers and assistance in respect of a wide variety of items relating to your trading relationship with Alsim
Click here to ask a question
in relation to our
product range or service
Ask a Question
Your ideas for the enhancement of our product or service
© Alsim System Building Limited